We are proud to make available to you the finest stone and masonry sealer in the world! Perm-Seal is the best sealer on the market today – proven time after time against all other competitors. Perm-Seal has passed the tough testing standards of the Tile Council of America and Alcoa Technical Center.
|
|
Other Sealers |
Perm-Seal |
Water-based silicone product |
Petroleum based product-no silicones, acrylics or urethanes |
Minimum of 48 hours before installation of grout sealing. |
Newly-grouted installations to Seal within 15 minutes, no need for return trips to finish |
Should not be used on ceramic tile |
Can be used on all ceramic tiles, glazed and unglazed |
Thoroughly remove all surface sealers and previous coatings before use |
Can be applied over other sealers and coatings |
Do not apply on any surface not recommended |
Apply to any surface including tiles, fabric, carpet, wood, glass, paint or aluminum |
Allow 2 hours drying time between coats. |
Little or No dry time between coats |
Long drying time |
Very quick drying |
Use only on porous tile, natural stone and masonry surfaces |
Use on any type of surface |
1-3 coats are necessary |
One coat is necessary |
Avoid overlapping, puddling and rundown |
No need to worry about this |
Wipe surface dry 3-5 minutes after application |
No wiping of the surface is necessary |
Do not dry product on tile or let it come in contact with any other non-recommended surface |
Dries invisible, No worries about other surfaces |
Printer-friendly